Additional Tray for the above.
Additional Tray for the above.
Automated Tube Stripper battery operated for different types of Blood Bag tubes.
RQS A is an automated tube stripper for smooth & effortless stripping of blood bag tubes. The proper mixing of blood present in the tube with the entire content of blood bag helps in anticoagulation of blood in the tubing, prior to preparing segments. This is an integral & important process during blood collection & quality component preparation.
The ergonomically designed hand held automated tube stripper helps in improving compliance as manual tube stripping makes technician’s prone to wrist injuries due to ergonomic causes. The automation also helps in standardization of the process & adherence to the SOP’s. The battery backup for 1000 cycles in RQS-A makes it an ideal choice for blood donation camps.
Automatic Plasma Expressor
Automatic Plasma Expressor
Bench Top Heavy Duty Sealer
WELDON – B
WeldOn-B is a robust benchtop sealer with consistent performance. ideally suited for blood component separation lobs.
WeldOn-B helps to keep the bolld bag system completely sterile. Ensures quality sealing with clear rupture line for easy tear apart segments.
Safely features & monitoring system makes it an ideal choice of users.
Continuous Heavy duty A/C stirrer with 1/4 HP Brushless, High Torque Variable Speed Motor with Hollow Shaft &propeller of SS 316, chuck, having facility of presetting & indication of speed.
AC STIRRERS
These Stirrers are specially designed brushless AC variable speed stirrers driven by frequency inverter to ensure reproducible speed with any load
Model RQ-140/D-FP is available with flame proof motor & frequency inverter inside flameproof enclosure.
These stirrers have steady & constant speed for viscous materials and solutions that change viscosity during mixing. They have built in digital RPM indicator for process validation and reproducibility.
CYCLO MIXER CM -101 / CM-101 PLUS
CYCLOMIXERS / VORTEX MIXERS
SALIENT FEATURES
- Designed for mixing liquids in Schools, Laboratories & Factories
- Touch/ Continuous Operation mode Selection through bi-directional Switch
- Speed Regulation through knob provided on the control panel
- Interchangeable mixing heads for use with variety of tubes
- Supplied with all interchangeable mixing heads
Data Logger including software *16 Channel & 100 m Data Cable for installation
Data Logger including software *16 Channel & 100 m Data Cable for installation
Data Logger including software *8 Channel & 100 m Data Cable for installation
Data Logger including software *8 Channel & 100 m Data Cable for installation
Direct Drive Stirrer with brushless Motor,LCD Display of Speed & Torque (20 Ltr Capacity)
REMI presents the next generation of laboratory stirrers for stirring / mixing etc. of chemical, pharmaceutical, food and cosmetic products. The equipment basically consists of body, chuck, stainless steel blade propeller and stand.
SALIENT FEATURES
- 2 models – 40 liters & 20 liters capacity
- Advanced Stirrers with microprocessor technology
- Speed range 50 – 2200 rpm
- Monitoring of set & actual speed
- Constant speed even with change of load / Voltage
- High torque even at low speeds
- Accurate stirring speed control
- Maintenance free Brushless DC motor ensures high torque
- Easy-to-read backlit LCD for display of set & actual parameters
- Display of torque / speed
- Last parameter recall, ideal for repetitive processes
- Motor protection in case of continuous overload
- Accepts shafts up to 13mm Ø
- Protection class acc. to DIN/EN 60529
- Stopper for protection of vessel & shaft
- Special base design for topple free operation
Direct Drive Stirrer with brushless Motor,LCD Display of Speed & Torque (40 Ltr Capacity)
Direct Drive Stirrer with brushless Motor,LCD Display of Speed & Torque (40 Ltr Capacity)
DOCTOR or MEDICO or CLINICAL CENTRIFUGE with 24 x 5 ml. angle head & 5 ML. RIA polypropylene Tubes.
DOCTOR CENTRIFUGE with 24 x 5 ml. angle head & 5 ML. RIA polypropylene Tubes.
Dry Hot Air Oven (50 or 80 or 130 or 220 Liters) with temperature setting from RT + 10°C up to +300°C
REMI Dry hot air oven – RDHO series are specially designed to achieve extreme dryness by evaporating all moisture contents from the biomass or other material. Microprocessor control helps in achieving precise high temperature with forced convection. Suitable for varied applications in laboratories and scientific research institutions
SALIENT FEATURES:
- Microprocessor PID controller (with timing function)
- Polished stainless-steel chamber with rounded corners for easy & quick cleaning
- Uniform distribution of air temperature
- Forced-air convection
- Double layer glass door, larger viewing window
Freezer, temperature range -16°C to -24°C, 245 or 340 Liters capacity, Plastic inner chamber & outer body of G.I
These Deep Freezers are designed for quick freezing and storing of Blood Components, Serum, Vaccines, Biological & Medical Specimens, Clinical Samples, etc. at low temperatures.
Engineered for just a little bit more, the new REMI series of Upright Freezers gives you up to -24°C instead of the conventional -20°C.
SALIENT FEATURES
- Plastic inner chamber; Outer body pre painted G.I.
- Quick freezing function
- Sealed drawers – prevent frost loss from open door
- Solid state temperature controller
- Adjustable baskets / shelves
- Low energy consumption and noise levels
Heavy Duty Direct drive Stirrer with brushless induction motor, frequency drive, chuck, digital speed indicatorhaving facility of presetting of speed (100 litres Capacity)
REMI presents the next generation of laboratory stirrers for stirring / mixing etc of chemical. pharmaceutical, food and cosmetic products. The equipment basically consists of body. Chuck, stainless steel blade propeller and a U-type stand.
SALIENT FEATURES
- High torque even at low speeds
- Monitoring of set & actual speed
- Wide range of impellers
- Advanced Stirrers with microprocessor technology
- Advanced Stirring speed control through VFD
- Constant speed even with change of load / Voltage
- Easy -to- read display of set & actual parameters
- Last parameter recall. Ideal for repetitive processes
- Accepts shafts up to 13mm
- Motor protection in case of continuous overload
- Stopper for protection of vessel & shaft
- Special base design for topple free operation
Laboratory Centrifuge (max. speed 6000 rpm) with brushless induction motor, frequency drive, LCD display ofspeed and time, imbalance detector, dynamic brake, safety lid lock, accelaration / decelaration profiles and rotor identification, supplied without rotors and accessories
Laboratory Centrifuges model R-8C Plus & R-8M Plus are suitable for routine sample analysis in Medical, Hospital, Pathology and heads and adaptors, those units are truly versatile.
Micro Centrifuges models R-12C Plus are ideal for growing routine application in biochemical and clinical labs, for Hematocrit, Corpuscle Percentage contents in blood, Serum analysis and precipitate separation etc.
SALIENT FEATURES
- Automatic rotor identification, ensures operator safety
- Stainless Steel centrifuge Chamber, easy to clean
- Brushless Induction motor with variable frequency drive
- Microprocessor controller with digital display
- Stable speed output even under unstable voltage conditions
- Smooth & soft start
- Low sample temperature rise
- Inverter fault detection with auto shutdown
- 7 segment LED display of speed (R-8C Plus/R-12C Plus)
- Alphanumeric LCD display of speed & RCF (R-8M Plus)
- Selection of 3 acceleration & deceleration profiles (R-8M Plus)
- Digital countdown timer & continuous run
- Safety lid interlock to prevent lid opening during centrifugation
- Imbalance detection & centrifugation stop with display of error
- Dynamic brake for quick deceleration
- Motor overload protection
- Gas hinge to prevent door falling
- Emergency lid lock release
- Last set parameters recall (Useful for repetitive analysis)
- Wide variety of rotors & reduction adaptors
| Technical Data | |||
| Models | R-8C Plus R-8M Plus | R-12C Plus | |
|---|---|---|---|
| Max. Speed | rpm | 6000 | 16000 |
| Max. RCF | “g” | 5070 | 21000 |
| Max. Capacity | ml | 400 | 40 |
| Digital timer range | Min | 0-99 | 0-99 |
| Noise | ≤ 60 dB | ≤ 60 dB | |
| WxDxH | mm | 380x470x300 | 380x470x300 |
Magnetic Stirrer 1 litre capacity with Digital Speed Indicator, speed upto 1500 rpm.
Magnetic Stirrer 1 litre capacity with Digital Speed Indicator, speed upto 1500 rpm.
“ML” series of Magnetic Stirrers with stainless steel top housing are most compact models. Permanent Magnet DC (PMDC) motor gives high torque even at lower speeds and maintains speed stability despite viscosity or volume changes. Different models available for all types of laboratory stirring applications up to 10 liters. Accurate stepless speed control with digital display allows smooth variation up to 1200 rpm.
“MLH” series Magnetic Stirrers with hot plate are similar to the ML series of magnetic stirrers but have additional stainless steel hot plate. Heat energy is controlled by energy regulator.
SALIENT FEATURES
- PMDC motor for higher torque even at low speeds
- Better speed regulation even with small volume and low speeds
- Accurate stepless speed control maintains excellent speed stability.
- Digital Speed Indicator for displaying of stirring speed
- Totally enclosed unit
- Designed for use even in corrosive atmosphere
Magnetic Stirrer Ceramic Coated Hot Plate (Max. temp. 300°C), speed upto 1500 rpm,LCD display of speed & temp supplied without external PT-1000 probe & stand (Optional Accessories)
REMI presents the next generation of magnetic stirrers with new stir technology. These are available in both hotplate
& without hotplate versions.
SALIENT FEATURES
- Speeds range 150 – 1500 rpm
- Stainless Steel Hot Plate model for temperatures up to 340°C
- Ceramic Hot Plate model for temperatures up to 550°C (10 MLH Plus)
- Easy-to-read backlit LCD for display of set & actual parameters
- Monitoring of set & actual temperature / speed
- High accuracy of temperature control with embedded dual sensors
- Advanced Stirrers with microprocessor technology
- Constant speed even with change of load / Voltage
- Maintenance free brushless motor
- Scratch proof & excellent chemical resistance
- External temperature probe (PT-1000) for control of fluid temperature
- Last parameter recall, ideal for repetitive processes
- Unique safety temperature control system
- Settable safe temperature limit to avoid overheating
- Residual Temperature warning when unit is switched off for operator safety
Magnetic Stirrer with Stainless Steel Top Plate, speed upto 1500 rpm.
Ultra – flat compact magnetic stirrer, guaranteed with modern magnet coil technology. Wear- free with no moving parts. To ensure better mixing, the lab disc can reverse direction of rotation automatically every 30 seconds.
SALIENT FEATURES
- No moving parts – truly maintenance free
- Low aspect ratio (just 12 mm thick)
- Software driven gradual acceleration
- Adjustable speed (15 to 1500 RPM) with digital display
- Microprocessor controlled with last run memory feature
- Stirring cap. 800 ml – set up place of 100 mm
- Pulse mode – reverses the direction every 30 secs for proper mixing
- Universal power supply – small wall mount adaptor
- IP 65 compliant design (Water spill resistant)
- Corrosion resistant SS top surface to fight harsh chemicals
- Recommended Stir bar length 25 mm
- Supplied with 1 (one) high strength stir bar
Micro magnetic stirrer 500ml capacity , speed upto 1500 rpm.
Micro magnetic stirrer 500ml capacity , speed upto 1500 rpm.
Microplate Shaker with setting of time, speed up to 1800 RPM, for microplate shaking
Microplate Shaker with setting of time, speed up to 1800 RPM, for microplate shaking
The Digital Microplate Shaker is an essential instrument for mixing individual micro plates of different type.
SALIENT FEATURES
- Tiny footprint-as small as the plate itself
- Digital Display with Speed & Time setting
- Speed selection from 300 to 1800 RPM Maintenance free BLDC motor
- Orbital Diameter of 2 mm for thorough mixing, microprocessor controlled for high accuracy
- Silent & stable operation
- Timer setting of to 99 min & Continuous mode
- A Special turn down toggle clamp for spill proof & simple side in/side out for loading / unloading of microplate
- Universal fit-comes with interchangeable clamps for different micro plates (Tool free and easy clamp change procedure)
- Even mixing in all wells across the plate
- Comes With attachment for 20 x 1.5/2ml microtubes
- Can be used inside fume hoods / cold rooms.
MINI ROTARY SHAKER with 0-15 minutes timer and speed regulator max. 180 rpm.
MINI ROTARY SHAKER with 0-15 minutes timer and speed regulator max. 180 rpm.
For gentle mixing of fluids in test tubes & glass vessels of different capacities. These shakers find applications in pathology, microbiology, chemistry, molecular biology & biotechnology.
Model RS-12 Plus / RS-18 Plus shakers have Brush less DC (BLDC) Motor having a wide speed range upto 400 rpm. A universal platform is with adjustable rollers and is also suitable to accommodate interchangeable clamps of assorted sizes / capacities for holding conical flasks, making the unit truly versatile in performance. A variety of clamps are available having capacity of 500 ml, 250 ml, 150 ml and 100/50 ml (To be ordered separately)
Model RS-12R shakers are with AC/DC Universal motor with maximum speed of 180 rpm & with on built speed regulator. These shakers have platform with 3 adjustable rollers.
Mini Stirrer with Brushless DC Motor, LCD display of speed (5 litres capacity)
LABORATORY STIRRERS
REMI presents the next generation of laboratory stirrers for stirring / mixing etc of chemical. pharmaceutical, food and cosmetic products. The equipment basically consists of body. Chuck, stainless steel blade propeller and a U-type stand.
SALIENT FEATURES
- High torque even at low speeds
- Monitoring of set & actual speed
- Wide range of impellers
- Advanced Stirrers with microprocessor technology
- Advanced Stirring speed control through VFD
- Constant speed even with change of load / Voltage
- Easy -to- read display of set & actual parameters
- Last parameter recall. Ideal for repetitive processes
- Accepts shafts up to 13mm
- Motor protection in case of continuous overload
- Stopper for protection of vessel & shaft
- Special base design for topple free operation
Mini stirrer with PMDC Motor having Stirring shaft & propeller in SS 316, Digital Speed indicator & speed regulator.
AC/DC LAB STIRRERS
These are designed to meet requirements of laboratories demanding wide flexibility of stirring operations. These stirrers are available in various models. The choice of model will be dependant on the batch size / volume to be stirred.
SALIENT FEATURES:
- Multipurpose stirrers for general purpose & PUF stirring
- Heavy duty stirrers for pilot plant, bench scale process & small batch production
- Models also available with digital speed indicator for speed indication & process validation
Multi Tube Vortexer, max speed 2500 rpm, microprocessor control with LCD display
Multi Tube Vortexer, max speed 2500 rpm, microprocessor control with LCD display
The Multi-Tube Vortexer is designed for mechanical and chemical cell lysis, mixing suspensions, and general sample agitation. The Multi-Tube Vortex mixer is a tool to provide that extra degree of mixing, however it accommodates full racks of tubes or microwell plates, vials or cylinder as opposed to single tubes. Consequently, this unit is useful for higher throughput mixing of samples. The suction-cup feet dampen motion and prevent sliding on work surface. Equipped with a powerful, permanent magnet motor with sealed ball bearings.
The variable speed microprocessor control provides consistent uniform mixing action
Non Refrigerated Plasma Thawing Bath operating Temperature +37°C
Non Refrigerated Plasma Thawing Bath operating Temperature +37°C
REMI Thawing bath offer quick and optimum thawing of plasma at required temperature levels.
Available in two variants Refrigerated & Non-Refrigerated
CB 704, is a refrigerated thawing bath for preparation of cryoprecipitate at required temperature of 4°C
CB-705, is a non-refrigerated thawing bath for quick thawing of plasma at required temperature of 37°C.
SALIANT FEATURES:
- Microprocessor based precise temperature control
- High performance 1.5 kw heater & compressor to achieve the set temp
- Over temperature safety limit, audio visual alarm
- LED monitor to display the working status of thawing bath
- Continuous water circulation for temp uniformity & rapid thawing
- Audio visual alarm after elapsed time
- Capacity to thaw 15 plasma bags
Phlebotomy Chair
FLABO X
THE PREMIUM PHLEBOTOMY CHAIR
REMI premium phlebotomy chair FlaboX is ergonomically designed, allowing patient’s correct posture during phlebotomy.
FlaboX is designed specifically for blood sample collection, the upholstered arms have a wide support surface with angular & vertical adjustment.
FlaboX is extremely strong & sturdy, equipped to accommodate high load capacity up to 150 kg.
COMFORT
- Curved backrest to support spinal curvature for comfortable seating
- Auto adjustable & non slippery foot rest
- Broad sitting space, accommodates obese patient
SUPPORT
- Broad, firm and comfortable hand rest
- Vertical & horizontally adjustable hand rest for right phlebotomy position
- Comfortable soft and adjustable head rest
HYGIENE
- Stain-resistant & washable upholstery
- Interwoven stitching reduces dust accumulation
- Easily cleanable smooth edges
Portable Donor Chair
REMI Portable Donor Chair model PDC 1X. specially designed for blood donation camps to provide comfort and safety to the blood donors.
- Ergonomic robust design
- Stable & aesthetically beautiful
- Complete construct with stainless steel
- Highquality anti bacterial fabric
- Foldable for easy transport
- Adjustable safety belt for patient safety
- Towel bar at top
- 15kg light weight for easy transportaton
- IV Stand optional (standalonel)
- Comfortable seating
- Trendelenburg (Head lowl & Reverse-Trendelenburg (Sitting Posture) positon
- Elegant ergonomic knobs for the hand rest adjustment
- Adjustable head rest positions for easy phlebotomy
- Elegant ergonomic knob for handrest adjustment
- Adjustable hand rest positions (Up / down and horizontal/circular)
- Comfortable molded foamed hand rests
Professional Mobile Refrigeration Box – 100 Ltrs, operates on 230 Volts AC, 12 Volts / 24 Volts DC, Option to attached external battery
MOBILE TRANSPORT BOX
MBT SERIES
MBT 100 is a refrigerated mobile transport box for easy & safe transfer of temperature sensitive biological products.
It provides active temperature control with a compact powerful compressor. The flexibility of operations with options of AC / DC power makes it an
ideal choice in maintaining cold chain on the move.
The wide temperature setting range supports requirement of different products. The display & alarm system control helps in continuous monitoring of temperature.
SALIENT FEATURES
- Digital display of temperature
- High / low temperature alarm
- Wide temperature range (-20°C to +24°C)
- CFC Free Refrigerant R134a
- Lockable castor wheels with recessed handle
- SS Hinges & Pad lockable door latch for easyclosure of lid
Refrigerated Centrifuge for Blood Component Separation with touch screen controller display [ Suitable for 8/12 blood bags ]
KBM 80 Plus is the new generation microprocessor controlled blood bank centrifuge with forward thinking design and technology. Ideally used for centrifugation of whole blood for components separation like packed red cells, platelet rich plasma, platelet concentrate, cryoprecipitate and buffy coat etc.
Advance manufacturing techniques are used for mounting of brushless induction drive motor in PUF insulated, corrosion free, stainless steel armored chamber, resulting in minimized vibration and noise level. The smooth acceleration / deceleration helps in clear separation thus ensuring high quality component yield.
This centrifuge cater to the requirements of small, medium & large blood centers with flexibility to choose from 3 rotor options. The rotors are designed to accommodate specific type of oval shaped metal buckets & plastic carriers for holding six, eight & twelve blood bags of different volumes & configuration like 350 ml / 450ml, double / triple / quadruple, penta bags & inline-filter (quintuple) blood bags.
User-friendly software & controls helps in ease of operation. There is a unique facility for setting & controlling the centrifuge run either by RPM (speed) or RCF (g force) thus eliminating the need of manual calculations. Interactive menu driven program guides the operator through the setting process of run parameters & also the operational status while centrifuge is running.
Specially designed wind shielded rotors reduces friction which helps in energy saving & better temperature management. Advanced imbalance sensor neutralize 90g loading imbalance.
KBM BO Plus comes with 2 variants
- 1.LCO Version
- 2.TFTVersion
Refrigerated PRP Centrifuge for low volume autologous PRP extraction with reduction adaptors for RA-501 (4Units)
REMI is a leading name in India for Blood Bank & Laboratory equipments. REMI is synonymous for centrifuge performance, since year 1960. Our expertise in blood component separation brings the best solution – PRP Ultra centrifuge for easy extraction of low volume autologous PRP.
PRP Ultra ensures platelet concentration up to 4-5 folds every time. Pre-validated dual spin programs in PRP ultra helps in maintaining standard platelet properties & yield. Microprocessor controls all 5 critical centrifuge parameters (RPM/RCF, Acceleration, Deceleration, Time & Temperature), for consistent results.
Consistent Performance: Brush-less induction drive motor (practically maintenance free), prevents speed variations, Sophisticated anti vibration system for jerk free operations,
Safety Features: Door interlock prevents accidental lid opening, Overload protection & Imbalance cut off for safety of operator & system.
Ease of Operation: Interactive multicolor backlit LCD display, Feather touch Keypads, Emergency lid opening in case of power failure, LED window to see status of centrifugation from a distance, Comfortable height for an easy access
Supports Hygiene: Easy to clean ABS rounded corner body & Stainless steel inner chamber
REVOLUTIONARY GENERAL PURPOSE LABORATORY CENTRIFUGE (max. speed 5250 rpm) with speed regulator,safety lid lock, digital speed meter & timer, but without rotor heads and accessories.
Laboratory Centrifuges model R-8C is suitable for routine sample analysis in Medical, Hospital, Pathology and Institutional laboratories. With a wide choice of rotor heads and adaptors, this unit are truly versatile.
Micro Centrifuges model RM-12C is ideal for growing routine application in biochemical and clinical labs, for Hematocrit,Corpuscle Percentage contents in blood, Serum analysis and precipitate separation etc.
SALIENT FEATURES :
- Digital Speed Indicator
- Stepless speed regulator
- 0-99 minutes digital countdown timer
- Imbalance detector with cut off
- Safety Lid interlock to prevent cover opening during centrifugation
- Press Switch for quick acceleration to full speed (RM-12C)
Roller Mixer with 6 rollers to make the uniform sample for better results
TUBE ROLLER MIXER
SEROROLL 6
SeroRoll-6 is specially designed to achieve uniform consistency in the serological samples, eventually helps in increasing the sensitivity of the planned testing. Rolling bed of Seroroll-6 is designed to mix all size samples in blood sample tubes, falcon tubes®,culture bottle etc.
Roller Mixer with 6 rollers to make the uniform sample for better results
Rotary Shaker with Brushless induction motor, frequency drive, speed 20 to 300 rpm with 4″ LCD display of speed along with universal platform of size 24″ x 24″ (without flask holding clamps)
Rotary Shaker with Brushless induction motor, frequency drive, speed 20 to 300 rpm with 4″ LCD display of speed along with universal platform of size 24″ x 24″ (without flask holding clamps)
RS – 24 PLUS
These Shakers are ideal for mixing and development of cultures, chemicals, solvents, and assays etc. in Microbiological, Cell Culture & Life Science laboratories.
The Unit has base assembly fabricated from heavy mild steel sections. Brushless Induction drive motor with frequency drive makes the unit suitable for continuous non-stop operation. Step less electronic frequency control ensures gentle start and maintains preset speed. Compact counter balanced drive mechanism ensures high stability and reliability even in continuous operation & uneven load distribution.
Serology Centrifuge for quick & innovative cell washing & testing
Serology Centrifuge for quick & innovative cell washing & testing
QUIKFUGE
QUICKLY GRADES AGGLUTINATION REACTIONS WITHIN 15 SECONDS
VERSATILE CENTRIFUGE FOR QUICK, INNOVATIVE CELL WASHING & TESTING
- Blood typing
- Cross matching
- Genotyping
- Phenotyping
- Coombs testing
- Manual cell washing
SALIENT FEATURES:
- Single hand removal of rotor head from spindle
- Retainer silicon ring to hold the tubes firmly with rotor
- The interchangeable heads work like holders, avoids individual handling while
- Sample filling
- Sample centrifugation
- Sample incubation
- Sample emptying or pouring off
- Sample tube position
- In Motion: Swing out to an angle of 45° – For quick cell deposition
- At Rest: Resume a vertical position “ For easy pouring off supernatant solution after button is formed
- Tube positions are numbered for quick identification
- Easy cell washing : Supernatant solution can be poured off from all the tubes simultaneously by inverting rotor head
- Easy switch over for preset stable speed of 400g & 1000g with switch over button
- Quick time setting in seconds & minutes
- Contoured ABS steel enforced body
- Stable speed output even under unstable voltage conditions
- Double armoured break proof protection for inner chamber
- Preset acceleration & deceleration for quick operations
- Buzzer on alarm for process status
- Door interlock
- Last parameter recall
Seven days Circular Chart Recorder (For BR/RPF/PDV)
Seven days Circular Chart Recorder (For BR/RPF/PDV)
Specialized Double Pan Equalizer for balancing Centrifuge Buckets, calculating volume of whole blood, packed RBC, Plasma & Platelets as per specific gravity.
Specialized Double Pan Equalizer for balancing Centrifuge Buckets, calculating volume of whole blood, packed RBC, Plasma & Platelets as per specific gravity.
Teflon coated magnetised stirring paddle 13 mm dia x 35 mm long.
Teflon coated magnetised stirring paddle 13 mm dia x 35 mm long.
Teflon coated magnetised stirring paddle 13 mm dia x 50 mm long.
Teflon coated magnetised stirring paddle 13 mm dia x 50 mm long.
Teflon coated magnetised stirring paddle 7 mm dia x 12 mm long.
Teflon coated magnetised stirring paddle 7 mm dia x 12 mm long.
Teflon coated magnetised stirring paddle 7 mm dia x 15 mm long.
Teflon coated magnetised stirring paddle 7 mm dia x 15 mm long.
Teflon coated magnetised stirring paddle 9 mm dia x 25 mm long.
Teflon coated magnetised stirring paddle 9 mm dia x 25 mm long.
Teflon coated magnetised stirring paddle 9 mm dia x 35 mm long.
Teflon coated magnetised stirring paddle 9 mm dia x 35 mm long.
Therapeutic Chairs suitable for Blood Donation, apheresis & Plasma exchange with 3 motors, movement for Legsection, Back Section & Height Adjustment.
HEMODIALYSIS CHAIR / CHEMOTHERAPY CHAIR / THERAPEUTIC CHAIRS
The innovative design of the Dzire 2X / 3X Therapeutic Chair underlines the high quality Standards. The comfortable upholstery creates a pleasant environment and feeling of wellbeing for patients.
Three electric motors offer simple and smooth movements of all desired positions further adding to patient relaxation whilst receiving treatment.
The remote control provides greater flexibility as all desired chair positions can be adjusted easily.
Vaccine Freezer 125 ltr Capacity as per WHO/PQS/E003/FZ01.2 Standards
REMI Vaccine Freezers are specially designed to meet storage requirement of biological samples, specimens & vaccines as well as freezing ice packs for cold chain maintenance.
WHO – GMP certified manufacturing unit with no hazardous chemical. Tropicalized to run under ambient condition of 10°C to 43°C temperature & up to 95% RH humidity.
Vaccine Freezer 125 ltr Capacity as per WHO/PQS/E003/FZ01.2 Standards
Vaccum Oven (50 Liters) temperature range from RT + 10°C to +200°C
Vacuum ovens are very versatile pieces of equipment with applications in laboratory research, engineering, and industry. Vacuum oven is generally used for drying of substances which are hygroscopic and heat sensitive and is based on the principle of creating a vacuum to decrease the chamber pressure below the vapour pressure of the water causing it to boil. It can be filled with inert gases, especially for rapid drying of some compound material. The low pressure environment also minimizes oxidation during drying.
The materials to be dried are kept on trays and pressure is reduced by means of vacuum pump. Steam is passed through the space between trays and jacket, so that heat transfer occurs by conduction. The oven door is locked airtight and connected to vacuum pump to reduce the pressure. Microprocessor controller with digital display ensures precise and homogenous temperature control. Dual layer tempered glass door is provided for clear observation. Adjustable aluminum expansion shelves ensure optimal heat transfer within oven chamber
Vaccum Oven (50 Liters) temperature range from RT + 10°C to +200°C
Water bath 15 liter capacity with 6 concentric adaptors temperature setting from RT + 5°C up to +99°C
REMI WATER BATH
RWB SERIES
REMI Water Bath is multipurpose water bath with adjustable double line six holes to hold different size samples for easy & hygienic heating. RWB provides precise and constant temperature helps achieving uniform heating for the samples.
SALIENT FEATURES
- Microprocessor control with timing function
- Digital display
- Audible and visual alarm for over temperature
Water bath 15 liter capacity with 6 concentric adaptors temperature setting from RT + 5°C up to +99°C
WATERBATH SHAKER with tray for 12 flasks of 100 ml.
WATERBATH SHAKER with tray for 12 flasks of 100 ml.